Mystery Wood Block JS416
2.8" x 5.8" x 5.8"
3.6 lbs.
This is a dense, dark exotic block of uncertain species. At about 66 lb/ft³, it’s in the range of Katalox (Swartzia cubensis) or Mexican Royal Ebony, which is our best guess based on its density, color, and grain. We’re listing it as Mystery Wood since we can’t confirm it.
The block is about 80% dark brown heartwood, with beige to peach sapwood visible on three faces. The growth rings show nice contrast between lighter earlywood and darker latewood. There is no bark. The pith is included, and there is a void where the pith has broken out, mid-block on the front face (see close-up photo). There may be fine cracks radiating from the pith that aren’t visible yet. Before turning, I’d flood the void and the surrounding area with thin CA glue and let it wick in, then fill the void with medium or thick CA or a tinted epoxy. Dark coffee grounds or sanding dust mixed into epoxy make a nice, natural-looking fill. Check again for cracks after rough-turning, and wear a face shield until you’re confident the piece is sound.
This is a very hard, dense wood. It turns crisply and finishes to a high natural polish, but it’s tough on tools, so sharpen often and take light cuts. It’s well suited to a small bowl, a box, or several smaller turnings cut around the pith.
Fully air-dried to under 10% moisture content and ready to turn.